Place of origin-Metal-oxide surge arrester-YH5WS-10/30
Place of origin-Metal-oxide surge arrester introduction:
Metal-oxide surge arrester is one of the most advanced protectors limiting overvoltage, and is the basis of the insulation coordination equipment in power industry.Metal-oxide surge arrester has many advantages such as quick action, flat Vol-ampere characteristics, low residual voltage, high discharge current capacity, stable electrical performance,long lifecycle,simple structure and etc.Metal-oxide surge arrester is widely used in power generation, transformation and distribution system to prevent the insulation of the power equipments from being damaged by the over-voltage.
Polymer-housed metal-oxide surge arrester is the scientific achievement that combines the advantages of organic insulation material and traditional porcelain-clad MOA technique.Metal-oxide surge arrester has excellent insulation performance,high dialectical strength,anti-leaking,anti-electric corrosion,heat-resisting,cold-resisting,anti-aging,explosion-proof,and good chemical stability,hydrophobic property,and nice sealing.Metal-oxide surge arrester is designed and manufactured strictly following the standard of GB 11032 and achieves advantage against the competitive international products.
Description of type:
According to the JB/T 8459-2011,the type of MOA shows as below:
| Product type: | Y-porcelain-housed | YH-polymer-housed | |
| Structure feature: | W-without gap | C-with series gaps | B-with shunt gaps |
| Service condition: | S-distribution | Z-power station | R-shunt capacitor |
| D-motor | T-electrical railway | X-overhead line |
| Additional feature: | W-anti-pollution | TH-for hot and humid area | G-high altitude type |
Normal service conditions of metal-oxide surge arrester:
1.For indoors and outdoors;
2.Ambient air temperature within the range of-40℃~+40℃;
3.Altitude not exceeding 2600m;
4.Frequency for A.C.power supply not less than 48Hz and not exceeding 62HZ;
5.Power Frequency voltage applied continuously between the terminals of the arrester not exceeding its continuous operating voltage;
6.Earthquake intensity:8 degree and below;
10.Maximal wind velocity not exceeding 35m/s. Please indicate in the contract,at exceptionally movement condition.
Advantage of metal-oxide surge arrester:
1.Metal-oxide surge arrester have low partial discharge;
2.Metal-oxide surge arrester have low residual voltage;
3.Metal-oxide surge arrester have high dielectric insulation level;
4.Tolerance to high/low temperature;
5.Explosion-proof;
6.Anti-corrosion;
7.Anti-aging;
8. Shorter lead time (Ex-work 1 week+).
Technical parameters:
Metal-oxide surge arrester-Aapless MOA for Distribution
Below info. only for your reference, all data shall be specified and determined by technical specification and customer demand.
| Technical Parameta /Product type | Nominal voltage of system | Rated voltage kV.m | Continuou operation voltage | Reference voltage at D.C.1mA kV.pc | Nomina discharge current kA .peak | Lightning 1mpulse | Steeping mpulse | Switching impulse | Parachute diameter φ mm | Height H mm | Fig No |
| YH5WS-5/15 | 3 | 5 | 4.0 | 7.5 | 5 | 15.0 | 17.3 | 12.8 | 76 | 200 | 1 |
| YH5WS-10/30 | 6 | 10 | 8.0 | 15.0 | 5 | 30.0 | 34.6 | 25.6 | 76 | 200 | 1 |
| YH5WS-12/35.8 | 10 | 12 | 9.6 | 18.0 | 5 | 35.8 | 41.2 | 30.6 | 76 | 255 | 1 |
| YH5WS-15/45.6 | 10 | 15 | 12.0 | 23.0 | 5 | 45.6 | 52.5 | 39.0 | 76 | 255 | 1 |
| YH5WS-17/50 | 10 | 17 | 13.6 | 25.0 | 5 | 50.0 | 57.5 | 42.5 | 76 | 255 | 1 |
The structure and installtion dimensional drawing:
Product Tags:
|
|
Indoor / Outdoor Metal Oxide Surge Arrester With Series Gap YH5WS-10/30 Images
|
